> For the complete documentation index, see [llms.txt](https://help.holixa.com/be.smart-site-management/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.holixa.com/be.smart-site-management/getting-started/project-set-up-in-site-management/site-management-project-configuration/toggles.md).

# Toggles

Improving the customer experience basic settings can be defined for the project

Toggles can still be changed during a session, but the default values are defined in Project configuration. The selection of toggles contain following options:

* Show markings on the map
  * Options: *Yes / No / Not configured*
* Show views on the map
  * Options: *Yes / No / Not configured*
  * *Please note that Views are not supported in Autodesk Construction Cloud*
* Automatically center the map when opening models
  * Options: *Yes / No / Not configured*
* Color surfaces based on their Inframodel type coding information
  * Options: *Yes / No / Not configured*
* Show stationing for all alignment geometries, not only for reference lines
  * Options: *Yes / No / Not configured*
* Show user's own location on the map
  * Options: *Yes / No / Not configured*
* As-built tolerances
  * Options: *Yes / Not configured + The Z- minimum and maximum value*

<div data-full-width="true"><figure><img src="https://content.gitbook.com/content/5BpwPICy7UBlDgnb7FKH/blobs/Yx2WGnQP8ZGX0s8OnRnZ/toggles.png" alt=""><figcaption><p>Toggles - default settings</p></figcaption></figure></div>